aluDOOR
The new, premium enclosure generation, including door
IP 66, IP 67, IP68 (1.2 m; 2 h), IP 69K The integration of true hinges without additional expenditure has been implemented successfully in the new series. After the »mounting« of the lid and the fixation with the securing screws, they turn into »compact cabinets« with stainless steel screws and stainless steel threaded bushings. Even under extreme operating conditions, this arrangement ensures an absolutely safe and permanent closure technology. aluDOOR enclosures are available either with recesses in the lid for the installation of membrane keypads (ADF) or with a flat lid (ADO). Finally, the installation level of the enclosures is covered by design covers made of aluminium (finished in matt silver), providing an unparalleled design. All enclosures have domes in bottom sections and lids for the secure fastening of installations.
The key product features:
• Enclosure material: diecast aluminium
• Enclosure surface: powder coating, RAL 7016
• 100° opening angle
• Structurally integrated lid hinges
• Integrated recess in lid for membrane keypad or front plate
• Stainless steel lid screws and threaded inserts
• Enclosure lid without or with recess for fitting a membrane keypad or product label
• Clip-on design covers
• Enclosure seal: PUR
• Honoured with the German Innovation Award 2023
More
aluDOOR enclosures are a further development of the unique series aluCASE. This enclosure has an unmistakable progressive design. They are the modern, contemporary »packaging« for innovative industrial electronics.
- aluDOOR
- ADO 090
- Part No.
- 134.090.000
- Dimensions
- 90x120x70 Remember
- aluDOOR
- ADO 092
- Part No.
- 134.092.000
- Dimensions
- 90x160x70 Remember
- aluDOOR
- ADO 110
- Part No.
- 134.110.000
- Dimensions
- 110x140x80 Remember
- aluDOOR
- ADO 112
- Part No.
- 134.112.000
- Dimensions
- 110x200x80 Remember
- aluDOOR
- ADO 130
- Part No.
- 134.130.000
- Dimensions
- 130x160x80 Remember
- aluDOOR
- ADO 132
- Part No.
- 134.132.000
- Dimensions
- 130x220x80 Remember
- aluDOOR
- ADO 150
- Part No.
- 134.150.000
- Dimensions
- 150x180x90 Remember
- aluDOOR
- ADO 152
- Part No.
- 134.152.000
- Dimensions
- 150x260x90 Remember
- aluDOOR
- ADO 170
- Part No.
- 134.170.000
- Dimensions
- 170x200x90 Remember
- aluDOOR
- ADO 172
- Part No.
- 134.172.000
- Dimensions
- 170x280x90 Remember
| Enclosure sizes | 10 - with 2 lid variants: ADF = Series with recess in the lid and ADO = Series with flat lid |
| Further information | Integrated hinge function on side D with 2 securing screws (A2, self-forming) |
| Captive lid secured with two screws Fastening with closed enclosure | |
| Clip-on design covers, coated silver matt | |
| Opening angle of the lid max. 100° | |
| Enclosure | Die cast aluminium alloy EN AC-44300 DIN EN 1706 (GD Al Si 12/DIN 1725) 1° mould slope for casting ejection > Internal circumference dimensions decrease by 1° towards enclosure base |
| Fastening | Separate screw channels |
| Internal mountings | Fastening domes with M5 thread on the enclosure bottom and in the lid |
| Ingress protection | IP 66, IP 67, IP 68 (1.2 m; 2 h) / EN 60529, IP 69K / ISO 20563 |
| Gasket | Foamed, polyurethane (PUR) Optional: Silicone seal Optional: EMC gasket |
| Surface | Powder coating, RAL 7016 Design covers, silver matt powder coating Optional: Special colours Optional: Corrosion protection |
| Lid screws | Stainless steel 1.4567, M5 with TX25, captive |
| Lid fastening thread | Casting sleeves, stainless steel A2 |
| Hinge | Securing screws M5 self-forming for hinge attachment |
| ROLEC Service | Utilise our full service offer for installation-ready enclosures |
