aluTWIN
The two-chamber enclosure
IP 66, Optional: IP 67
The key product features:
• Enclosure material: diecast aluminium
• Enclosure surface: lid powder coating, RAL 7040, bottom powder coating, RAL 7035
• Design with equally high covers
• Secure connection technology due series terminals in a connection space opened separately
• Chambers can be separated by isolation wall
• Lid screws in stainless steel 1.4567
• Enclosure seal: TPE moulded gasket, silicone-free, connection space: O-ring gasket (CR)
More
aluTWIN is a range of high-performance dual-chamber diecast aluminium enclosures for heavy duty electronics and electrical equipment.
The design offers the option of installing the electronics and terminals in separate sections to protect them from each other during installation and servicing. The enclosures are based on our aluNORM product range and are weatherproof and watertight to IP 66. Threaded screw bosses are provided inside for fitting circuit boards, mounting plates etc.
We can supply aluTWIN enclosures fully customised to your requirements.
- aluTWIN
- AT 100
- Part No.
- 104.100.000
- Dimensions
- 100x166x81 Remember
- aluTWIN
- AT 160
- Part No.
- 104.160.000
- Dimensions
- 160x240x103 Remember
- aluTWIN
- AT 162
- Part No.
- 104.162.000
- Dimensions
- 240x240x103 Remember
- aluTWIN
- ATF 100
- Part No.
- 105.100.000
- Dimensions
- 100x166x55 Remember
| Enclosure sizes | 4 |
| Additional info | Secure connection technology due to the printed circuit boards or series terminals in connection spaces that can be opened separately |
| Both chambers can be separated with the isolation wall included | |
| Different lid variants | |
| Specially developed external mounting brackets made from diecast aluminium | |
| Enclosure | Diecast aluminium alloy |
| EN AN-44300 DIN EN 1706 | |
| (GD Al Si 12/DIN 1725) | |
| 1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom. | |
| Fastening | Space-saving single-channel technology for lid and fastening screws outside of the enclosure interior |
| Internal mounting | Fastening thread in lateral bars on the enclosure base. |
| Ingress protection | IP 66 / EN 60529 |
| Optional: IP 67 | |
| Gasket | Chloroprene O-ring gasket (CR) |
| or TPE moulded gasket, silicone-free | |
| Optional: Silicone gasket | |
| Lid screws | Stainless steel 1.4567, captive |
| Surface | Powder coating |
| Bottom: RAL 7035, light grey | |
| Lid: RAL 7040, window grey | |
| Optional: Special colours | |
| Optional: Corrosion protection | |
| Customising | Learn more about our full customising service for installation-ready enclosures |
