commandCASE
The modern operating and control enclosure
Optionally available certification:
IP 66
The key product features:
• Enclosure material: diecast aluminium
• Enclosure surface: powder coating, RAL 7035
• Ergonomically shaped design handle bars
• Practical quick-acting closure
• Version CC: hinged lid with quick-action closure
• Version CCS: hinged lid, screw-fixed from the rear section
• Version CCV: fixed lid, screw-fixed from the rear section
• Connection to the suspension systems profiPLUS or taraSMART
• Integrated recess in cover for membrane keypad or front plate
• Enclosure seal: PUR
More
commandCASE is an elegant and economic range of diecast command and control enclosures. The highly attractive design perfectly matches our profiPLUS suspension arm system, or other modern arms systems. All models feature ergonomic handles on the front for easy positioning when suspended.
The range is available in three versions: with hinges and quick-action closure (also lockable), with hinges and screw fixing or as a fully screw fixed version. Lid supports provide strain-relief. The front is recessed to accommodate a membrane keypad, front plate or display panel. At the rear the screw channels are fitted with cover caps which also serve as edge protection. Threaded screw bosses are provided inside for mounting assemblies and components. Mounting plates, matching cable glands and other accessories are also available.
We can supply commandCASE enclosures fully customised to your requirements.
- commandCASE
- CC 200
- Part No.
- 193.200.000
- Dimensions
- 200x230x120 Remember
- commandCASE
- CC 202
- Part No.
- 193.202.000
- Dimensions
- 200x330x120 Remember
- commandCASE
- CC 250
- Part No.
- 193.250.000
- Dimensions
- 250x280x120 Remember
- commandCASE
- CC 252
- Part No.
- 193.252.000
- Dimensions
- 250x380x120 Remember
- commandCASE
- CC 300
- Part No.
- 193.300.000
- Dimensions
- 300x330x120 Remember
- commandCASE
- CC 302
- Part No.
- 193.302.000
- Dimensions
- 300x430x120 Remember
| Enclosure sizes | 6 sizes in 3 variants |
| Additional info | Designer handles |
| Integrated recess in the lid for membrane keypad or front plates | |
| End caps made from polyoxymethylene (POM), RAL 7016 anthracite grey | |
| Integrated lid support, PP (polypropylene), RAL 7040 window grey | |
| Optional: Quick-acting closure and hinge, narrow side (side W) | |
| Enclosure | Die-cast aluminium alloy |
| EN AN-44300 DIN EN 1706 | |
| (GD Al Si 12/DIN 1725) | |
| 1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom. | |
| Fastening | On a ROLEC suspension arm system or directly attached to the wall in the version with lock and hinge - with or without designer handles |
| Internal mounting | M5 fastening thread on the enclosure base and in the lid |
| Ingress protection | IP 66 / EN 60529 |
| Gasket | PUR |
| Surface | Powder coating RAL 7035, light grey |
| Optional: Special colours | |
| Optional: Corrosion protection | |
| Customising | Learn more about our full customising service for installation-ready enclosures |
