aluNORM
The multivariable enclosure
Optionally available certification:
IP 66, Optional: IP 67
The key product features:
• Enclosure material: diecast aluminium
• Enclosure surface: powder coating, RAL 7035
• Single-channel mounting for greater installation volume
• Sizes compatible with polyTOP polyester enclosures, therefore easy to exchange
• Lid screws in stainless steel 1.4567
• Enclosure seal: TPE moulded or PUR gasket, silicone-free
More
aluNORM IP 66 diecast aluminium enclosures are designed to protect electrical and electronic components. The enclosures are available in four different versions with different lid and base combinations. This gives a huge variety of sizes and design options to choose from.
Uniquely, aluNORM enclosures are mounted to a wall or machine using the same screw channels as the lid fixings. This means there is more space inside for your assemblies and components. EMC shielded versions are available for the AS and AD variants, and some AF and AH variants - see ordering details. Threaded screw bosses in the lid and base enable fast installation of terminal rails, mounting plates etc. Matching cable glands and accessories are also available.
We can supply aluNORM enclosures fully customised to your requirements.
aluNORM variant AD - raised cover, flat bottom
- aluNORM
- AD 080
- Part No.
- 101.080.035
- Dimensions
- 80x80x60 Remember
- aluNORM
- AD 082
- Part No.
- 101.082.035
- Dimensions
- 80x120x60 Remember
- aluNORM
- AD 084
- Part No.
- 101.084.035
- Dimensions
- 80x160x60 Remember
- aluNORM
- AD 100
- Part No.
- 101.100.035
- Dimensions
- 100x100x80 Remember
- aluNORM
- AD 102
- Part No.
- 101.102.035
- Dimensions
- 100x150x80 Remember
- aluNORM
- AD 104
- Part No.
- 101.104.035
- Dimensions
- 100x200x80 Remember
- aluNORM
- AD 120
- Part No.
- 101.120.035
- Dimensions
- 120x120x100 Remember
- aluNORM
- AD 122
- Part No.
- 101.122.035
- Dimensions
- 120x180x100 Remember
- aluNORM
- AD 124
- Part No.
- 101.124.035
- Dimensions
- 120x240x100 Remember
- aluNORM
- AD 160
- Part No.
- 101.160.035
- Dimensions
- 160x160x100 Remember
- aluNORM
- AD 162
- Part No.
- 101.162.035
- Dimensions
- 160x240x100 Remember
- aluNORM
- AD 164
- Part No.
- 101.164.035
- Dimensions
- 160x320x100 Remember
- aluNORM
- AD 166
- Part No.
- 101.166.035
- Dimensions
- 160x480x100 Remember
- aluNORM
- AD 200
- Part No.
- 101.200.035
- Dimensions
- 200x200x120 Remember
- aluNORM
- AD 202
- Part No.
- 101.202.035
- Dimensions
- 200x300x120 Remember
- aluNORM
- AD 204
- Part No.
- 101.204.035
- Dimensions
- 200x400x120 Remember
- aluNORM
- AD 240
- Part No.
- 101.240.035
- Dimensions
- 240x240x120 Remember
- aluNORM
- AD 242
- Part No.
- 101.242.035
- Dimensions
- 240x360x120 Remember
- aluNORM
- AD 244
- Part No.
- 101.244.035
- Dimensions
- 240x480x120 Remember
- aluNORM
- AD 320
- Part No.
- 101.320.035
- Dimensions
- 320x320x120 Remember
- aluNORM
- AD 322
- Part No.
- 101.322.035
- Dimensions
- 320x480x120 Remember
- aluNORM
- AD 324
- Part No.
- 101.324.035
- Dimensions
- 320x640x120 Remember
| Enclosure sizes | 86 |
| Additional info | 4 different variants |
| AS (deep bottom, flat lid) AD (flat bottom, deep lid) AF (flat bottom, flat lid) AH (deep bottom, deep lid) | |
| Compatible assembly dimensions with the polyTOP range (polyester enclosure) | |
| Optional: Specially developed external mounting brackets made from die-cast aluminium, available from AS 080 | |
| Enclosure | Diecast aluminium |
| EN AC 44300/EN AC-44200 (DIN EN 1706) | |
| 1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom. | |
| Fastening | Space-saving single-channel technology for lid and fastening screws outside of the enclosure interior Even square enclosures can be screwed into any position without problems, thanks to the symmetrical arrangement |
| Internal mounting | Fastening thread in lateral bars on the floor of the enclosure and a fastening option and/or thread in the lid (both depending on the variant) |
| Mounting plate made from galvanised sheet steel available as an accessory | |
| Ingress protection | IP 66 / EN 60529 |
| Optional: IP 67 / EN 60529 | |
| Gasket | TPE moulded or PUR gasket, silicone-free |
| Lid screws | Stainless steel 1.4567, captive |
| Surface | Powder coating RAL 7035 light grey |
| Optional: Special colours | |
| Optional: Corrosion protection | |
| Customising | Learn more about our full customising service for installation-ready enclosures |
