aluPLUS
The plus side of technology and design
Optionally available certification:
IP 66, Optional: IP 67
The key product features:
• Enclosure material: diecast aluminium
• Enclosure surface: powder coating, RAL 7035
• Clip-on designcovers. RAL 7016
• The enclosure can be mounted even when the lid is fitted
• Integrated recess to accommodate a membrane keypad or front plate
• Compatible with standard enclosures available on the market, therefore easy to exchange
• Lid screws in stainless steel 1.4567
• Enclosure seal: Silicone moulded gasket
More
aluPLUS is a versatile and highly attractive range of diecast aluminium enclosures designed for modern industrial electronics. The range is available in eight industry standard sizes and rated to IP 66 and IP 67. The enclosures can be mounted on a wall or machine, or used as portable instruments.
Design features include a recessed lid, for fitting a membrane keypad or product label, clip-on plastic design covers which hide the lid fixing and mounting screws, and lid retaining straps which keep the lid in place when open. The enclosures can be mounted without opening the lid which means your electronics remain protected at all times. Threaded screw bosses are provided in the base and lid for fitting PCBs, mounting plates, terminal rails etc. An extensive range of accessories and matching cable glands is also available.
We can supply aluPLUS enclosures fully customised to your requirements.
- aluPLUS
- AP 082
- Part No.
- 196.082.000
- Dimensions
- 84x125x59 Remember
- aluPLUS
- AP 083
- Part No.
- 196.083.000
- Dimensions
- 84x175x59 Remember
- aluPLUS
- AP 100
- Part No.
- 196.100.000
- Dimensions
- 100x100x82 Remember
- aluPLUS
- AP 102
- Part No.
- 196.102.000
- Dimensions
- 100x160x82 Remember
- aluPLUS
- AP 120
- Part No.
- 196.120.000
- Dimensions
- 120x122x82 Remember
- aluPLUS
- AP 122
- Part No.
- 196.122.000
- Dimensions
- 120x220x82 Remember
- aluPLUS
- AP 161
- Part No.
- 196.161.000
- Dimensions
- 160x160x90 Remember
- aluPLUS
- AP 162
- Part No.
- 196.162.000
- Dimensions
- 160x260x90 Remember
| Enclosure sizes | 8 |
| Additional info | Fastening with closed enclosures |
| Integrated recess in the lid for membrane keypad or front plates | |
| Optional: Lid supports with integrated stainless steel (V2A) lid screw and plastic (PA6) lid retaining strap. | |
| Clip-on design covers, plastic PBT (polybutylene terephthalate), similar to RAL 7016 anthracite grey | |
| Enclosure | Diecast aluminium alloy |
| EN AN-44300 DIN EN 1706 | |
| (GD Al Si 12/DIN 1725) | |
| 1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom. | |
| Fastening | Separate screw channels |
| Internal mounting | M5 fastening thread on the enclosure base and in the lid |
| Ingress protection | IP 66 / EN 60529 |
| Optional: IP 67 / EN 60529 | |
| Gasket | Silicone moulded gasket |
| Optional: Chloroprene O-ring gasket (CR) | |
| Lid screws | Stainless steel 1.4567, captive |
| Surface | Powder coating RAL 7035, light grey |
| Optional: Special colours | |
| Optional: Corrosion protection | |
| Customising | Learn more about our full customising service for installation-ready enclosures |
