Designer suspension arm system for modern machines
Designer suspension arm system for modern machines
profiPLUS suspension arm application
profiPLUS suspension arm application
Designer profiPLUS arm with wall joint, support profile and hanging elbow coupling (fitted to commandCASE CC enclosure)
Designer profiPLUS arm with wall joint, support profile and hanging elbow coupling (fitted to commandCASE CC enclosure)
The unique intermediate joint demonstrates the high level of technology and design with profiPLUS
The unique intermediate joint demonstrates the high level of technology and design with profiPLUS
Single screw adjustment for easy levelling of the arm
Single screw adjustment for easy levelling of the arm
Example: upright desk coupling N with commandCASE
Example: upright desk coupling N with commandCASE
Reducer adaptor from profiPLUS 70 to 50
Reducer adaptor from profiPLUS 70 to 50
Plenty of space inside for cables such as HDMI, DVI or network connectors
Plenty of space inside for cables such as HDMI, DVI or network connectors
Cable outlet preparation for base
Cable outlet preparation for base
Accessory adaptors for fitting signal lights to arm joints and elbows
Accessory adaptors for fitting signal lights to arm joints and elbows
Standard cable protection bushes (e.g. elbow)
Standard cable protection bushes (e.g. elbow)
Set screw system for adjusting the pivot range
Set screw system for adjusting the pivot range
Integrated earth bonding in all system parts
Integrated earth bonding in all system parts
Example: wall joint, elbow, support profile including upright coupling, commandCASE
Example: wall joint, elbow, support profile including upright coupling, commandCASE
Designer suspension arm system for modern machines
profiPLUS suspension arm application
Designer profiPLUS arm with wall joint, support profile and hanging elbow coupling (fitted to commandCASE CC enclosure)
The unique intermediate joint demonstrates the high level of technology and design with profiPLUS
Single screw adjustment for easy levelling of the arm
Example: upright desk coupling N with commandCASE
Reducer adaptor from profiPLUS 70 to 50
Plenty of space inside for cables such as HDMI, DVI or network connectors
Cable outlet preparation for base
Accessory adaptors for fitting signal lights to arm joints and elbows
Standard cable protection bushes (e.g. elbow)
Set screw system for adjusting the pivot range
Integrated earth bonding in all system parts
Example: wall joint, elbow, support profile including upright coupling, commandCASE
profPLUS_video_group_en

profiPLUS 70

The premium design support arm system

IP 54

The key product features:
• System parts material: diecast aluminium, powder coating, RAL 7035
• Suspension profile material: aluminium profile, in anodised silver
• Integrated cable protection in all joint parts
• Integrated set screw system for adjusting the pivoting range
• Many couplings with pre-fitted suspension profile as standard
• Can be used with all ROLEC control enclosures; the perfect complement to ‘multiPANEL’ and ‘profiPANEL’
• Possible to route connectors such as HDMI, DVI, network adapters, etc.
• Comprehensive potential equalisation
• Gasket: chloroprene (CR)

To configure this product, please use our practical profiPLUS configurator

More


profiPLUS 70 is a modern suspension arm system which combines ergonomic design with advanced technology. The highly attractive appearance perfectly matches the design of modern machines. profiPLUS 70 offers more room for cables and connections than the smaller profiPLUS 50 system. At the same time, the system's bearing strength is significantly higher.

The profiPLUS 70 system is designed for time-saving assembly. For this, ROLEC engineers have developed the "one-screw adjustment" feature which means the system can be fully adjusted by just a single screw.  All system couplings are pre-fitted with a support profile as standard, saving assembly time. The ducts in the interior of the system provide space for multiple cables such as HDMI, DVI and network cables. Cable protectors are integrated into all rotating system elements as standard. Fully integrated electrical bonding protects operators and the machinery. A set screw system in the joints allows adjustment of the pivoting range in 30° steps. The range includes reducing adapter for connecting to the profiPLUS 50, thus making it possible to mount display panels from leading manufacturers such as Siemens, B&R and Beckhoff.

Request offer PDF datasheet
Product overview Dimensions Data Sheets Data
Load-bearing capacity Belastungsdiagramm_Alle_EN


PrincipleEconomic, compact and elegant designer suspension arm system for medium to heavy loads


Additional infoPossible to connect control enclosures from leading manufacturers such as Siemens, Beckhoff, B&R and ROLEC

The spacious cable routing offers an optimum connection with all interfaces, sufficient space is available for a range of cables and connectors

Patented ROLEC solution for alignment of the complete system in a horizontal direction through a single set screw!

Continuous equipotential bonding, DIN VDE 0113 / EN 60204-1 / IEC 204-1

All couplings are equipped with pre-fitted support profile as standard

Integrated cable protection in all system parts

Optional: Signal light adapters for joint and elbow


Material/coatingDiecast aluminium alloy, powder coated RAL 7035 light grey

Optional: Special colours

Support profiles: Extruded aluminium profile, anodised silver, preformed fastening thread

Optional: Anodised special colours or powder coated

Covers: Plastic (POM), RAL 7015 slate grey

Bellows: PVC-P, RAL 7016 anthracite grey, temperature resistance: -30°C to +70°C




GasketChloroprene O-ring gasket (CR)


Cable routingSuitable for HDMI, patch cables, DVI, USB, cold-device plugs etc.


Ingress protectionIP 54 / EN 60529
CustomisingLearn more about our full customising service for installation-ready enclosures

Give us a call

+49 5751 4003-0

 

Write us

info@rolec.com

or use our
contact form

Newsletter

Hier können Sie sich zum Newsletter anmelden.