Example of taraSMART application
Example of taraSMART application
Example of taraSMART application
Example of taraSMART application
Example of taraSMART application
Example of taraSMART application
Connection to panel PCs with Ø48 round tube mount
Connection to panel PCs with Ø48 round tube mount
Connection option for panel PCs with Ø48 round tube mount, as well as narrow and deep control enclosures
Connection option for panel PCs with Ø48 round tube mount, as well as narrow and deep control enclosures
Example of taraSMART application
Example of taraSMART application
Two elbows to choose from: for adapting to Ø48 round tube or the profile
Two elbows to choose from: for adapting to Ø48 round tube or the profile
Connection to or on the machine possible
Connection to or on the machine possible
Socket joint for floor mounting
Socket joint for floor mounting
Easy mounting of all components
Easy mounting of all components
Example of taraSMART application
Example of taraSMART application
Example of taraSMART application
Connection to panel PCs with Ø48 round tube mount
Connection option for panel PCs with Ø48 round tube mount, as well as narrow and deep control enclosures
Example of taraSMART application
Two elbows to choose from: for adapting to Ø48 round tube or the profile
Connection to or on the machine possible
Socket joint for floor mounting
Easy mounting of all components

taraSMART

The design support arm system

IP 54

The key product features:
• System components: diecast aluminium, RAL 7035 light grey
• Covers: thermoplast, RAL 7016, anthracite grey
• Support profiles: extruded aluminium, rectangular and round tube ∅ 48 mm, silver anodised
• Can be used with all ROLEC control enclosures
• Possible to route connectors such as HDMI, patch cable, USB, etc.
• Gasket: Chloroprene (CR)

To configure this product, please use our practical taraSMART configurator

More


taraSMART is a sophisticated suspension arm system for modern machine construction. The perfect symbiosis of technical design and sophistication. It offers sufficient space for routing HDMI or DVI cables, or network plugs. Installation is quick and easy, thanks to the familiar, tried and tested technology. The coupling variants of the system enable the connection of both narrow and deep control enclosures. Thanks to the Ø48 bracket, the straightforward connection of panel PCs with a round tube frame can take place without additional adapters.

Request offer PDF datasheet
Product overview Dimensions Data Sheets Data
Load-bearing capacity Belastungsdiagramm_Alle_EN


PrincipleEconomic, compact and elegant designer suspension arm system for light to medium loads


Additional informationConnection of HMI/control enclosures from leading manufacturers with a round tube frame (such as Siemens, Beckhoff, B&R) possible

The generous cable routing offers an optimum connection with all interfaces, sufficient space is available for a range of cables and connectors

Horizontal alignment of the complete system assembly possible at all joints!










Material/coatingDie-cast aluminium alloy, powder coated RAL 7035 light grey

Optional: Special colours

Support profiles: Extruded aluminium profile, silver anodised

Ø48 round tubes: steel, silver coated

Covers: Thermoplast, RAL 7016, anthracite grey





GasketChloroprene O-ring gasket (CR)


Cable routingSuitable for HDMI, patch cables, DVI, USB, cold-device plugs, etc.


Ingress protectionIP 54 / EN 60529

ROLEC serviceAvail of our Full Service Offer for installation-ready products
ConfigurationTo configure this product, please use our practical taraSMART configurator

Give us a call

+49 5751 4003-0

 

Write us

info@rolec.com

or use our
contact form

Newsletter

Hier können Sie sich zum Newsletter anmelden.