profiCASE
- 2 sizes for panel PCs up to 10“
- Integrated handle strips
- Integrated hinge solution, captive lid
Product description
profiCASE is an economical alternative for panel PCs up to 10" and all types of electronic components. Thanks to its robust design, it is perfectly suited for both modern mechanical engineering and vehicle construction.
The integration of genuine hinges without additional effort has been optimally achieved in this series. After ‘hooking’ the covers and securing them with locking screws, they become ‘compact cabinets’.
The two profiCASE enclosures are available with the option of rear screw mounting – i.e. without screws visible from the front – (PCD) or with front screw mounting – for example, for direct wall mounting – (PCV).
All enclosures have domes in the lower section that offer the option of mounting with VESA 100 while remaining completely sealed. It is also possible to connect them to the profiPLUS and taraSMART suspension arm systems in a standing or hanging configuration.
Product overview
Technical data
| Enclosure sizes | 2 - with 2 cover variants: PCV = series with cover screw connection from the front and PCD = series with cover screw connection from the rear |
| Further information | Integrated hinge function on side C, optionally with 2 locking screws (A2, self-forming) to prevent the cover from being lost |
| Lid opening angle max. 95° | |
| Enclosure | Diecast aluminium alloy EN AC-47100 DIN EN 1706 (GD Al Si 12/DIN 1725) Draft angle BTM 1°/Lid 6° > Clear internal dimensions are reduced by 1° all around up to the enclosure base |
| Fastening | Separate screw channels |
| Fittings | Fastening domes on the enclosure base |
| Protection class | IP 65/66, IP 67 / EN 60529 |
| Seal | Foamed, polyurethane (PUR) |
| Sureface | Powder coating RAL 7016 or RAL 7035 Optional: Special colours |
| Cover screws | Stainless steel 1.4567, M5 with TX25, captive |
| Hinges | M5 self-forming locking screws for hinge fastening |
| ROLEC service | Avail of our Full Service Offer for installation-ready enclosures |
Application examples
Find out more about the product in the video
Watch the video to find out more about profiCASE and get a clear impression of the product. The video gives you the chance to experience profiCASE from different angles and get an initial overview.
Frequently Asked Questions
The required protection rating depends on the environmental conditions to which the enclosure is exposed. Depending on the product, ROLEC offers protection ratings ranging from IP 54 to IP 69K, providing solutions for a wide variety of applications – from dusty production environments to high-pressure cleaning.
ROLEC enclosures are designed for continuous use in demanding industrial environments. Their mechanical robustness is described, amongst other things, by the IK protection rating and depends on the material, design and application.
We would be happy to recommend the right enclosure solution for your mechanical requirements.
Yes. On request, we can supply your housing fully machined and ready for assembly.
Our range of services includes, amongst other things:
• Drilling, milling and thread cutting
• Cut-outs for displays and control elements
• Integration of HMI components
• Engraving, screen printing and digital printing
• Customised surface finishes
This means you receive a complete, ready-to-install solution from a single source.
The durability of an enclosure depends on the material used and the specific operating conditions.
Factors that influence this include, for example:
• Chemicals and cleaning agents
• UV radiation
• Moisture and salt water
• Temperature
• Mechanical stress
Your personal contact will help you select the right material for your application.
Depending on the product, various approvals and certifications are available.
These include, amongst others:
• IP protection ratings
• UL approval
• DNV approval
• CSA approval
We would be happy to check on a case-by-case basis which certifications are available for your chosen product.
Yes. ROLEC offers a range of options for customising the colour of your enclosures, HMI enclosures and support arm systems.
Depending on the application, the following options are available, amongst others:
• Powder coatings in almost all RAL colours
• 2K wet paint finishes
• Highly weather-resistant coatings
• Surface treatments such as SurTec 650
The most suitable coating depends on the environmental conditions and your design requirements.
Yes. In addition to our extensive standard range, we offer numerous options for customisation.
Our product ranges, for example, are particularly flexible:
• multiPANEL
• profiPANEL
• mobilCASE
Furthermore, on a case-by-case basis, we also produce project-specific non-standard sizes and bespoke designs.
Yes. Many ROLEC enclosures are ideal for use with membrane keyboards, as they already feature a recessed area in the lid designed to accommodate them.
On request, we can supply your chosen enclosure complete with a precisely fitted membrane keyboard and other components such as display panels or front films. All components are tailored exactly to your application and professionally assembled.
Yes. ROLEC offers a range of methods for permanent, high-quality marking of your enclosures.
These include, amongst others:
• Screen printing
• Digital printing
• Engraving
• Company logos and customised markings
The marking is tailored precisely to your corporate design and technical requirements.
Yes. Given the wide range of enclosure series, materials and configuration options available, we would definitely recommend a personal consultation.
Our experts will help you choose the right enclosure solution and support you every step of the way, from the initial idea to the finished product. In many countries, we also offer on-site consultations. Find your personal contact here.
Yes. In addition to an extensive standard range, ROLEC also develops and manufactures bespoke enclosure solutions for a wide variety of applications.
Depending on the project, we can provide, amongst other things:
• Customised machining
• Non-standard dimensions
• Special colours and finishes
• Customised labelling
• Integration of control elements and displays
• Complete, ready-to-install solutions
Even for small batch sizes, we work with you to develop a solution that is precisely tailored to your requirements.
Our HMI/IPC enclosures are designed for the integration of a wide range of commercially available panel PCs and control panels.
These include systems from, amongst others:
• Beckhoff
• B&R
• Siemens
• Phoenix Contact
• Allen-Bradley
• ASEM
Many other manufacturers’ products can also be integrated without any problems. We would be happy to check the compatibility of your panel and recommend the most suitable enclosure solution.
Yes. ROLEC offers specialised EMC enclosures that reliably protect sensitive electronics from electromagnetic interference. The conFORM and conTROL series are unique standard EMC enclosures that do not require any additional, expensive sealing solutions.
Depending on the product, various shielding concepts are also used, such as conductive seals or a special EMC coating. As a result, many of our enclosures are particularly suitable for applications with high electromagnetic compatibility requirements. We would be happy to advise you on selecting the right EMC solution!
The lead time depends on the enclosure series selected and the extent of the required finishing. Many standard enclosures are available at short notice. Customised solutions involving machining, labelling or assembly may take slightly longer, depending on the project.
Thanks to our manufacturing facilities in Germany and efficient production processes, we are also able to complete bespoke projects at short notice. We would be happy to provide you with the delivery time for your chosen specification.
Yes. On request, ROLEC can provide you with much more than just an empty housing.
Among other things, we take care of:
• mechanical machining
• assembly of components
• fitting of display panels
• integration of membrane keyboards
• assembly of HMI components
• customised labelling and surface finishes
You’ll receive a complete, ready-to-install solution that’s precisely tailored to your application. This reduces assembly effort, saves time and means you benefit from a single point of contact throughout the entire project.
For outdoor use, ROLEC offers various ranges of enclosures made from aluminium, plastic or polyester. The right solution depends on the specific environmental conditions – such as UV radiation, humidity, temperature or chemical exposure.
Many of our enclosures meet high protection ratings up to IP 69K and are specifically designed for long-term outdoor use. We would be happy to assist you in selecting the right enclosure solution.
Yes. Many ROLEC enclosures are designed for long-term outdoor use and offer high UV resistance.
Depending on the enclosure series, specially selected materials or high-quality surface coatings are used to ensure that colour, function and stability are maintained over the long term, even under intense sunlight. We would be happy to advise you individually on which model is suitable for your application.
Yes. Many ROLEC enclosures have been specifically designed for the integration of displays, touchscreens and HMI components.
On request, we can handle the entire mechanical machining process, including the display cut-out, mounting, display panel and membrane keypad. This provides you with a complete, ready-to-install solution that is perfectly tailored to your operating concept.
The permissible temperature range depends on the specific enclosure series and the material used.
Depending on the model, our enclosures are suitable for both very low and high ambient temperatures. In addition to the material, seals, surfaces and the installation situation also influence the permissible temperature range.
We would be happy to recommend the right enclosure for your operating conditions.
ROLEC enclosures generally have very high protection ratings. Depending on the series, protection ratings of IP 66, IP 67, IP 68 (1.2 m; 2 h) and IP 69K are available, offering reliable protection against water and dust.
Whether an enclosure is suitable for splash water, temporary submersion or high-pressure or steam jet cleaning depends on the specific protection rating. We would be happy to assist you in selecting the appropriate IP protection class.
Yes. We are happy to provide you with a sample of our products on request.
In addition, we can assist you with the development of prototypes and manufacture these, including machining, labelling or customised features. This allows the fit and function to be reliably tested even before series production begins.
ROLEC offers perfectly coordinated HMI enclosures and support arm systems, all from a single source.
Depending on the application, the following systems are used:
• profiPLUS 50 – designer support arms for light to medium loads
• profiPLUS 70 – designer support arms for medium to heavy loads
• taraSMART – modern support arm system with integrated cable routing
• taraPLUS – a cost-effective solution for numerous industrial applications
• QUADRO 50 – a robust support arm system for medium loads
• QUADRO 80 – a robust support arm system for heavy loads
Our support arm systems enable safe cable routing, high stability and ergonomic positioning of control units. We would be happy to assist you in selecting the right combination of enclosure and support arm.