technoBOX
The multivariable, thermoplastic enclosure
IP 66
The key product features:
• Enclosure material: ABS
• Enclosure surface: similar to RAL 7035
• Alternative design due to slanted lid edges
• Integrated recess in the lid for a membrane keypad or front plate
• Lid screws stainless steel 1.4567
• Fire protection class UL-94 HB
• Enclosure seal: O-ring gasket (CR)
More
technoBOX is a modern and inexpensive range of plastic enclosures for all types of electronics and electrical equipment. It is moulded in tough and long life ABS. The bevelled lid gives the housing an attractive appearance. A recess is provided in the lid for fitting a membrane keypad, front plate or product label. Threaded screw bosses in the lid and base can be used for fitting circuit boards, mounting plates, terminal rails etc. Mounting plates, front plates, cable glands and other accessories are also available.
We can supply technoBOX enclosures fully customised to your requirements.
- technoBOX
- TBA 060
- Part No.
- 220.060.000
- Dimensions
- 51x66x35 Remember
- technoBOX
- TBA 080
- Part No.
- 220.080.000
- Dimensions
- 81x83x60 Remember
- technoBOX
- TBA 082
- Part No.
- 220.082.000
- Dimensions
- 81x121x60 Remember
- technoBOX
- TBA 084
- Part No.
- 220.084.000
- Dimensions
- 81x161x60 Remember
- technoBOX
- TBA 102
- Part No.
- 220.102.000
- Dimensions
- 101x151x60 Remember
- technoBOX
- TBA 104
- Part No.
- 220.104.000
- Dimensions
- 101x201x60 Remember
- technoBOX
- TBA 120
- Part No.
- 220.120.000
- Dimensions
- 121x123x80 Remember
- technoBOX
- TBA 122
- Part No.
- 220.122.000
- Dimensions
- 121x201x80 Remember
- technoBOX
- TBA 160
- Part No.
- 220.160.000
- Dimensions
- 161x161x80 Remember
- technoBOX
- TBA 162
- Part No.
- 220.162.000
- Dimensions
- 161x241x80 Remember
| Enclosure sizes | 10 |
| Further information | Smart, modern design with bevelled lid |
| Fastening points compatible with standard enclosures | |
| Integrated recess in the lid for membrane keypad or front plate | |
| Optional external mounting brackets can be rotated by 90° | |
| Full protective insulation in accordance with VDE 0100 | |
| Enclosure | ABS halogen-free, similar to RAL 7035 light grey |
| 1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure base | |
| Special materials and colours on request | |
| Flammability | UL 94 HB |
| Fastening | Separate screw channels outside the enclosure interior |
| Internal mounting | Fastening option for self-tapping screws on the base of the enclosure and in the lid |
| Ingress protection | IP 66 / EN 60529 |
| Gasket | Chloroprene O-ring gasket (CR) |
| Lid screws | Stainless steel 1.4567, captive |
| Customising | Learn more about our full customising service for installation-ready enclosures |
